7 446 kr
Isuzu D-Max (2020-Current) Slimsport Roof Rack ...
DescriptionThis low-profile flat deck Slimsport rack has a load carrying area of 1410mm (55.5“) x...
DescriptionThis low-profile flat deck Slimsport rack has a load carrying area of 1410mm (55.5“) x 1141mm (44.9“). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket RRAC182 for most Front Runner side mount accessories (sold separately). Included in the Isuzu D-Max (2020-Cu...
1 040 kr
Isuzu D-Max (2020-Current) Slimsport Wind Fairing
DescriptionA wind fairing for the KSID002T. Air flows easily over the rack and accessories, reduc...
DescriptionA wind fairing for the KSID002T. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included.SpecificationsConsists of:1 X Wind Fairing1 X Wind Fairing Mid Support2 X Wind Fairing Side Support Brackets (Left Right Hand s...
8 244 kr
Isuzu D-MAX RG 3rd Gen Extended Cab (2020-Curre...
DescriptionThis 954mm/37.6” long, full-size, Slimline II cargo roof rack kit contains the Slimlin...
DescriptionThis 954mm/37.6” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and two (2) Low Profile Foot Rails to mount the Slimline II Tray to your Isuzu D-MAX RG 3rd Gen Extended Cab. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* For further in...
9 990 kr
Isuzu D-Max X-Terrain (2020-Current) Roll Top S...
Haul your adventure gear and toys in confidence while keeping your roll top on for the ultimate p...
Haul your adventure gear and toys in confidence while keeping your roll top on for the ultimate peace of mind. These off-road tough racks mount easily and keep your load bed clear for other uses. This kit creates a full size rack that sits above your Isuzu D-Max X-Terrain's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1156mm) and 4 feet that fit into the existing tracks. All Front Runner Rack Kits contain installation instructions as well as all ...
4 056 kr
Isuzu DC (1995-2004) Load Bar Kit / Track AND F...
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle whe...
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 40mm Feet, 2 1255mm Load Bars, 2 Isuzu DC 1220mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle. A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehic...
14 227 kr
Isuzu DMax X-Terrain (2020-Current) Slimline II...
Double up the loading space on your Isuzu DMax X-Terrain while safeguarding the contents of its l...
Double up the loading space on your Isuzu DMax X-Terrain while safeguarding the contents of its load bed. This robust pick-up truck kit creates a full-size Slimline II rack that sits above your DMax’s load bed. The Slimline II’s lightweight, modular construction makes it highly versatile and allows you to customize your setup with over 55 accessories so you can haul all your adventure gear. This kit creates a full-size rack that sits above your Isuzu DMax X-Terrain's truck bed. This Slimline ...
4 299 kr
Isuzu Frontier Load Bar Kit / Track AND Feet - ...
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle whe...
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 40mm Feet, 2 1165mm Load Bars, 2 Isuzu Frontier 1620mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle. A set of Load Bars with Track Mounted Feet used to transport gear on the roof of yo...
16 165 kr
Isuzu MU-X (2021-Current) Slimline II Roof Rack...
Gear up your 2021-Current Isuzu MU-X for your greatest adventures with this Slimline II Roof Rack...
Gear up your 2021-Current Isuzu MU-X for your greatest adventures with this Slimline II Roof Rack Kit. Installation is simple and drill-free, so you can get on the road as quick as you can strap your gear in. This 1964mm/77.3'' long, full-size, Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray to your 2021-Current Isuzu MU-X. Easily installs using the existing factory mounting points. No drilling required. All Fr...
11 443 kr
Isuzu RT50/85 DC (2013-2019) Slimline II Roof R...
This 1358mm/53.5'' long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, ...
This 1358mm/53.5'' long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Isuzu Double Cab. No drilling required. This 1358mm/53.5'' long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Isuzu Double Cab. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the com...
218 kr
Hi-Lift Jacks are notorious noise makers when travelling on the road. This formed rubber sleeve h...
Hi-Lift Jacks are notorious noise makers when travelling on the road. This formed rubber sleeve helps secure the handle and shaft of the jack to stop unwanted rattles. A simple and smart solution for stopping REQU035rattles. Formed to fit over the Hi-Lift Jack shaft and handle to prevent movement of the Hi-Lift Jack parts when transporting or storing. A ''gripper knob'' holds the Stop tightly in place in between the rungs of the Hi-Lift Jack shaft. Suitable to use with the JADA010 and can be ...
166 kr
James Baroud Quick Release Tent Channel Set - b...
Mounting your Tuffstuff Alpha, Tuffstuff Alpha2 and James Baroud tents to any Front Runner rack j...
Mounting your Tuffstuff Alpha, Tuffstuff Alpha2 and James Baroud tents to any Front Runner rack just got easier and quicker. With the help of this Channel Set you can use the Front Runner Quick Release Tent Mount to mount or remove your roof top tent in minutes.-Consists of:1 x Set of Nut PlatesFitting Instructions Materials used:Black powder coated steel Product Dimensions:85mm (3.3'') L x 23.5mm (0.9'') W x 5mm (0.2'') H (Single Nut Plate) Weight:0.35kg (0.77lbs)
412 kr
James Baroud Quick Release Tent Channel Set / 4...
Mount your Tuffstuff Alpha, Tuffstuff Alpha2 or James Baroud tent to any Front Runner rack with t...
Mount your Tuffstuff Alpha, Tuffstuff Alpha2 or James Baroud tent to any Front Runner rack with this set of 4 plates. These plates allow you to use the Front Runner Quick Release Tent Mount to mount or remove your roof top tent in minutes which means it can be stored when not in use. A set of 4 plates that allow you to mount your Tuffstuff Alpha, Tuffstuff Alpha2 James Baroud tent to a Front Runner Rack using the TBMK020BP. These black powder coated plates slide into the tent extrusion and b...
